Find High Pressure Rubber Joint on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)

The Latest Product Alerts Send Me

Full Face Flange Type

Product Description

Content:
This page including the Details and price list.

GYLDT normal products including following items, any other items available upon request, contact GYLDT for more information.

Full Face Type Rubber Expansion Joint
Full face type rubber expansion joints are molded wide arch designed, completed with full face rubber flanges, with no embedded metal ring. All rubber impregnated construction will extend service life, molded integral rubber flange prevents pushing out under pressure, but only DIN and part of ANSI drilling available, other drilling standard only supply on request.
Features and Benefit:
Absorbs directional movement
Absorbs vibration, noise and shock
Compensates for more misalignment
Wide flowing arch design
Integral rubber flange design, prevent rubber end pulling out
No gaskets required; integrally rubber flanged design

Data Sheet:

Notes:
1. Supply range can be more than DN3000, detailed data can be offered upon request.
2. Control units must be used when piping is not properly anchored.
3. The rated pressure 2.5MPa products will only be sold with control units.
4. Pressure rating is based on 30℃ operating temperature. The pressure rating is reduced at higher temperatures.
5. Weights in the above table are joints with DIN PN16 drilling retaining ring flanges.
6. Movements shown in the above table are non-concurrent.
7. Rated pressure in the above table is the maximum "working pressure". Test pressure is 1.5 times "working pressure", Burst pressure is 3 times " work pressure".
8. Normally, the flange drilling is based on DIN PN16, ANSI 150/250/300 lbs, BS PN10, JIS 10K are also available upon request.
Price List:
PS: unit price including one rubber Tube and two Flanges.

PS1:
1. Other Tubes material available upon request, contact GYLDT for more information.
2. Other Flange material available upon request, contact GYLDT for more information.
3. Other Flange standard available upon request, contact GYLDT for more information.
PS2:
1. When order amount less than $1000, the prices in above table are EXW basis. If CIF by sea needed, GYLDT will ask $500 for all the other costs.
2. When order amount between $1000 and $5000, the prices in above table are FOB China sea port basis. If CIF by sea needed, GYLDT will ask $200 for all the other costs.
3. When order amount between $5000 and $20000, the prices in above table are CIF to indicated port by sea basis.
4. When order amount more than $20000, please contact GYLDT for discount.
5. When urgent delivery need to be by air, please contact GYLDT for air freight.


Contact us if you need more details on High Pressure Rubber Joint. We are ready to answer your questions on packaging, logistics, certification or any other aspects about High Pressure Rubber Joint、High Pressure Rubber Joint. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Rubber Joint

Email to this supplier
  • *Subject:
  • To:
    Li
    Mr. Li
  • *Messages:
    Your message must be between 20-8000 characters