Find Single Arch Rubber Joint on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)

The Latest Product Alerts Send Me

Single Arch Type

Product Description

Content:
This page including the Details and price list.
GYLDT normal products including following items, any other items available upon request, contact GYLDT for more information.

Single Arch Rubber Expansion Joint
Single Arch type rubber expansion joints completed with molded arch tube and solid floating flanges, the flange drilling can be drilling according to DIN PN10/16/25, ANSI class 150, JIS 10K or Table D/E, etc. It is the economical choice to absorb movements and stress on piping systems, compensate for pipe misalignment, reduce vibration and system noise. They also protect against start-up forces as well as system surges. Refer to the Product Data Sheets for more information.

Features and Benefits
Economical, any flange standards available
Solid floating flanges, easy to install
High tensile aircraft cable is embedded in the raised face rubber ends to prevent pull out and avoids the sharp cutting edge of solid steel rings

No gaskets required

NOTES:
1. F/F length can be customized, detailed data can be offered upon request.
2. Control units must be used when piping is not properly anchored.
3. The rated pressure can be above2.5MPa, but products will only be sold with control units.
4. Pressure rating is based on 30℃ operating temperature. The pressure rating is reduced at higher temperatures.
5. Weights in the above table are joints with DIN PN16 drilling retaining ring flanges.
6. Movements shown in the above table are non-concurrent.
7. Rated pressure in the above table is the maximum "working pressure". Test pressure is 1.5 times "working pressure", Burst pressure is 4 times " work pressure".
8. Normally, the flange drilling is based on DIN PN16, ANSI 150/250/300 lbs, BS PN10, JIS 10K are also available upon request.
Price List:
PS: unit price including one rubber Tube and two Flanges.

Price List:
PS: unit price including one rubber Tube and two Flanges.
PS1:
1. Other Tubes material available upon request, contact GYLDT for more information.
2. Other Flange material available upon request, contact GYLDT for more information.
3. Other Flange standard available upon request, contact GYLDT for more information.
4. Hypalon/NR is Hypalon covered NR tubes.
PS2:
1. When order amount less than $1000, the prices in above table are EXW basis. If CIF by sea needed, GYLDT will ask $500 for all the other costs.
2. When order amount between $1000 and $5000, the prices in above table are FOB China sea port basis. If CIF by sea needed, GYLDT will ask $200 for all the other costs.
3. When order amount between $5000 and $20000, the prices in above table are CIF to indicated port by sea basis.
4. When order amount more than $20000, please contact GYLDT for discount.
5. When urgent delivery need to be by air, please contact GYLDT for air freight.


Contact us if you need more details on Single Arch Rubber Joint. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Single Arch Rubber Joint、Single Arch Rubber Joint. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Rubber Joint

Email to this supplier
  • *Subject:
  • To:
    Li
    Mr. Li
  • *Messages:
    Your message must be between 20-8000 characters