Find Buried Resilient Seated Gate Valves,Soft-Sealing Gate Valve,Resilient Seated Gate Valve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)

The Latest Product Alerts Send Me

Buried Resilient Seated Gate Valves

    Place of Origin: China

Product Description

Resilient Seated Gate Valves
The product is the key applied project by"11th five-year development technical bulletin" from the ministry of construction. It can be directly buried underground without building inspection shaft in order to save excavation space,which keeps pavement beautiful, reduces difficulty of construction and saves engineering cost as well.

This kind of Gate Valve can also adjust the distance from the buried point to the ground.the buried soft-sealing gave valve has advantages of long design service life-30 years,maintenance free,etc.it is also able to avoid the phenomenon of opening valve and stealing inspection shaft lid and hurt from missing inspecting shaft lid.

The gate valve has light switch and novel design,the bonnet ,covered by special rubber entirely,achieve the state of no leakage.it adopted reliable [o"type sealing ring without pressing disk root,and without maintenance.the product adopted Non-toxic epoxy resin electrostatic layer technology,which will meet the need of drinking water without rust water.

Application:
Our products have been widely used all over the China, in many industries_drainage, high-rising building, residential area, sewage treatment, fire control, oil, district heating, electricity etc.

Standards:

Design standard is according to DIN, ANSI/BS/JIS/EN are also available upon request.

Installation precaution (more details are based on installation and operation instruction):
Gate valves and pipe connection should keep natural smooth to avoid bending force produced and cage lid and extensible tube should be vertical.meanwhile, to guarantee reliable installation the top of valve box,keeping the same level to ground,would better have 5-10 centimeters at the top of extension rod.

Components and materials:

Valve body
Gray cast iron
Valve plate
Gray cast iron,ductile cast iron,NBR,NR,EPDM,HTV
Bonnet
Gray cast iron,ductile
Seal cartridge
Brass
Valve-stem nut
Brass
Valve rod\extension rod
Stainless steel
Protective pipe part Carbon steel tubes,Galvanized anticorrosion,coating anticorrosion Valve box\ Cage Lid Gray cast iron\ductile cast iron
Seal Ring
NBR,HTV

Specification:

Model
Mz45x-10
Mz45x-16
Nominal diameter
1.0mpa(10kgf/cm2)
1.6mpa(16kgf/cm2)
Nominal pressure
40-500mm
40-500mm
Protective tube length
0.3-2m
0.3-2m
Protective tube telescopic adjustment
0.2-1m
0.2-1m
Seal test pressure
1.1mpa(11kgf/cm2)
1.76mpa(17.6kgf/cm2)
strength test pressure
1.5mpa(15kgf/cm2)
2.4mpa(24kgf/cm2)
suitable temperature
≦120℃
≦120℃
suitable medium
Water,oil,plumbing,and other non-corrosive fluid
Water,oil,plumbing,and other non-corrosive fluid
driving mode
manual
manual

Performance Data:

specification
Min Buried dimension Hmin(mm)
Max buried dimension Hmax(mm)
Adjustable range (mm)
DN40
950
1450
500
DN50
950
1450
500
DN65
950
1450
500
DN80
975
1425
450
DN100
990
1410
430
DN150
1025
1375
365
DN200
1045
1355
310
DN250
1065
1335
260
DN300
1100
1300
200

Note: Other standards available.

Order instruction:

The distance from Pipe's center line or groove to ground and the amount of protective tube's adjustable telescopic should he marked during choosing buried Resilient Seated Gate Valves

  • Resilient Seated Gate Valves Nrs Flanged End

    Model NO.: Gate Valves Thread Position of Valve Rod: Outside Gate Valve Usage: Regulation Standard: DIN Application: Industrial Usage, Water Industrial Usage Dn: 40-1000: Pn: 5-40 Model: Resilient Seated Gate Valves Nrs Flanged End Size: F4/F5/BS5163 Signal: with Signal Trademark: BESTYEAR Transport Package: Box...

  • Resilient Seated Gate Valve En1074 F4 F4 BS5163 Awwac515 Awwac509 SABS664 SABS665 Pn16 250psi Flanged or Socket Gate Valve

    Model NO.: RSVF4-40-1000 Material: Cast Iron Pressure: Ordinary Pressure Seal Surface: Wedge Gate Valve Usage: Safety, Emptying, Flow Control Body: Ductile Iron Stem: Ss410, 304, 316, 431 Operator: Hand Wheel, Square Cap, Gear Box Trademark: AHSUNVAL, MEIJI, OEM Specification: CE, ISO, WRAS HS Code: 8481804090 Type:...

  • Resilient Seated Gate Valve, Flanged or Socket Gate Valve

    Model NO.: RSVF4-40-1000 Thread Position of Valve Rod: Inside Gate Valve Usage: Safety, Emptying, Flow Control Application: Industrial Usage, Water Industrial Usage, Househol Body: Ductile Iron Wedge: Ductile +NBR / EPDM Stem: Ss410, 304, 316, 431 Operator: Hand Wheel, Square Cap, Gear Box Painting: Epoxy Trademark: xl, gw...

  • Resilient Seated Gate Valve Nrs Flanged End BS5163 DIN F4/F5

    Model NO.: NRS Thread Position of Valve Rod: Inside Gate Valve Usage: Flow Control Standard: BS5163 Application: Industrial Usage Trademark: LC Transport Package: Plywood Pallet Specification: DN50-DN600 Origin: China HS Code: 8481804090 Other1.Delivery Time:25 days after order conformed.2.Standard: BS DIN MSS,API,AWWA,...

Contact us if you need more details on Buried Resilient Seated Gate Valves. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Soft-sealing Gate Valve、Resilient Seated Gate Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Gate Valve > Resilient Seated Gate Valves

Email to this supplier
  • *Subject:
  • To:
    Li
    Mr. Li
  • *Messages:
    Your message must be between 20-8000 characters